Shed Removal in Byron Bay
Shed removal in Byron Bay costs from A$150 to A$1,200 AUD for most garden sheds and usually takes 2–4 hours. The price covers dismantling, loading, licensed disposal and a final sweep. Concrete bases and asbestos sheeting are quoted as extras. Written quotes arrive by email within 24 hours, with at least five days' notice to book.
Old shed taking over the garden? Our Byron Bay team will handle the lot — demolition, loading, disposal and site clean-up — with a fixed written quote before we start. Covering every neighbourhood in NSW.
Last updated
Get Your Free Quote
No obligation, fast response
How much does shed removal cost in Byron Bay?
These are guide prices for Byron Bay in AUD. Your written quote fixes the final figure once we've seen photos of the structure and the access route.
| Job | Time on site | Guide price (AUD) |
|---|---|---|
| Small shed (up to 8x6ft / 2.4x1.8m) | 1–2 hours | A$150 – A$400 |
| Medium garden shed (8x6ft to 10x8ft) | 2–4 hours | A$300 – A$650 |
| Large shed, workshop or summerhouse | 4–7 hours | A$550 – A$1,200 |
| Greenhouse (glass or polycarbonate) | 1–3 hours | A$180 – A$500 |
| Sectional concrete garage | 3–8 hours | A$700 – A$1,800 |
| Concrete base or slab breakout | +2–5 hours | +A$250 – A$900 |
| Asbestos cement / fibro sheeting (licensed handling) | +2–6 hours | +A$450 – A$1,500 |
What moves the price of a Byron Bay job
- Footprint and height of the structure
- Materials — timber, steel, glass, felt or concrete panels
- Whether the base or slab is coming out too
- Access: side gate, alley width and distance to the vehicle
- Volume of contents left inside
What does shed removal in Byron Bay include?
From small metal sheds in Byron Bay back gardens to large timber workshops on NSW smallholdings, we've dismantled thousands of structures. Careful hand-demolition, tidy load-out and full disposal — no skip needed on your driveway.
What we remove in Byron Bay
- Aging garden sheds of any size
- Storm-damaged greenhouses
- Timber decking, sub-frame and joists
- Summerhouses, cabins and home offices
- Concrete bases, paving slabs and footings
Why Byron Bay homeowners choose us
Byron Bay homeowners choose us because we do the whole job — dismantle, remove, dispose and tidy up — for one fixed price. Fully insured, licensed waste carriers, and materials recycled wherever possible. Most quotes start around A$150 to A$1,200 AUD.
Timber sheds and workshops
Rotten feather-edge, shiplap and log-lap sheds are stripped panel by panel, nails pulled and boards stacked for recycling — no bonfires in a Byron Bay garden.
Metal and steel sheds
Corrugated and box-profile sheeting is unbolted, folded flat and sent straight to scrap, which usually offsets part of the disposal cost.
Greenhouses
Glass is taped, lifted and crated before the frame comes down, so there are no shards left in the borders or lawn.
Decking and pergolas
Boards, joists, posts and concrete post-fixings all come out, leaving level ground ready for whatever comes next at your Byron Bay property.
What types of sheds are common in Byron Bay?
Colorbond and Zincalume steel sheds
The most common backyard shed around Byron Bay. They unbolt quickly and the steel is recycled.
Fibro (asbestos cement) sheds
Common on properties built before 1990. Treated as asbestos until tested.
Timber garden sheds and cubby houses
Usually weathered treated pine, quick to dismantle and recycle.
Steel garages and carports on slabs
Larger structures where the slab may stay for a new build or be broken out.
Do you need council permission to remove a shed in Byron Bay?
In New South Wales, removing a small freestanding backyard shed is generally exempt from a development application. Approval can be needed where the property is heritage-listed, the shed is attached to the house or sits on a shared boundary, or the structure is large. Byron Bay's local council can confirm in a single phone call.
Asbestos rules in NSW
Sheds and garages built before 1990 in New South Wales often contain bonded asbestos cement, known as fibro. Under the national WHS framework, removing more than 10 square metres of bonded asbestos, or any friable asbestos, requires a licensed removalist. SafeWork NSW regulates the work and the NSW EPA regulates transport and disposal.
Tips, transfer stations and recycling for Byron Bay waste
Waste from Byron Bay jobs goes to licensed council tips, waste transfer stations and resource recovery centres. Steel (Colorbond and Zincalume) is sold for scrap, clean timber is chipped, and asbestos is wrapped and taken only to facilities licensed to accept it.
How does a Byron Bay shed removal work?
011. Send photos or dimensions
Message us a couple of photos of the structure and rough measurements. Nothing to install, no site visit needed for most Byron Bay jobs.
022. Get a fixed written quote
We email a fixed price, usually within 24 hours, covering labour, disposal and clean-up. No hourly rates, no day-of surprises.
033. Pick a date
Choose a slot at least five days out. We confirm the arrival window the day before so you're not waiting around.
044. We dismantle and clear
Our insured crew strips the structure by hand, loads out, sweeps the ground and sends you finished photos before leaving your Byron Bay property.
Access and parking in Byron Bay
Older Byron Bay streets often mean narrow side passages, shared driveways and restricted parking. We plan the route before we arrive: barrow runs where a truck can't get close, floor protection where the only access is through the house, and permits or cones where NSW parking is tight.
Getting ready for removal day
- Empty the shed of anything you want to keep
- Disconnect any electricity or water supply
- Unlock side gates and clear the access route
- Move cars off the driveway on the morning
- Let neighbours know if access is shared
Where does your old Byron Bay shed end up?
Everything we lift from a Byron Bay garden is sorted at our depot before it moves on. Clean timber goes to biomass or chipping, metal to scrap merchants, glass to glazing recyclers and plastics to a licensed reprocessor. Only genuinely mixed residue reaches landfill, which is why we typically divert over 85% of a NSW shed by weight.
Which areas near Byron Bay do we cover?
Our Byron Bay crew also works across the surrounding towns and suburbs in NSW. If your address is near any of the places below, the same pricing and booking process applies.
- Shed removal Narellan
- Shed removal Camden
- Shed removal Wyong
- Shed removal Tweed Heads
- Shed removal Yamba
- Shed removal Merimbula
- Shed removal Parramatta
- Shed removal Penrith
- Shed removal Blacktown
- Shed removal Liverpool
See every town we cover in NSW or all shed removal locations in Australia.
Byron Bay shed removal: frequently asked questions
How quickly can you remove a shed in Byron Bay?
Most Byron Bay bookings are completed within 3–7 days of your quote being accepted. During quieter weeks we can often get to NSW jobs sooner — mention "urgent" on your enquiry and we'll fit you in.
What happens to the waste from my Byron Bay shed?
Everything from your Byron Bay job is sorted by our licensed disposal partners. Timber, metal, glass and plastics are recycled wherever possible — we typically divert over 85% of shed materials from landfill.
Are you insured to work on Byron Bay properties?
Yes — we carry full public liability insurance, and our crew is trained in safe hand-demolition. Certificates are available on request before any Byron Bay booking.
Do you work weekends in Byron Bay?
We run limited Saturday slots across NSW for customers who can't be home midweek. Weekend availability is tighter, so book earlier — and remember we need at least five days' notice on every Byron Bay booking.
Is there a minimum notice period?
Yes — we ask for a minimum of five days between your quote being accepted and the Byron Bay job date so we can route the crew and book disposal capacity. Urgent jobs are sometimes possible if a slot opens up; mark your enquiry "urgent" and we'll let you know.
What size sheds can you remove in Byron Bay?
Anything from a 6x4 tool shed to a double garage-sized workshop. Small timber and metal sheds are usually a half-day job; larger workshops, multi-bay structures and anything with a concrete base or asbestos-cement roof sheeting take longer and are priced accordingly after we see photos of the Byron Bay site.
What do I need to do before the crew arrives?
Empty the shed of anything you want to keep, unplug and disconnect any power or water feeds, and make sure there's a clear route from the shed to where we can park in Byron Bay. If you can't clear the contents, tell us and we'll price that in rather than turning up short of time.
Do I need permission to remove a shed in Byron Bay?
In New South Wales, removing a small freestanding backyard shed is generally exempt from a development application. Approval can be needed where the property is heritage-listed, the shed is attached to the house or sits on a shared boundary, or the structure is large. Byron Bay's local council can confirm in a single phone call.
Which tip, transfer station or resource recovery centre does waste from Byron Bay go to?
Waste from Byron Bay jobs goes to licensed council tips, waste transfer stations and resource recovery centres. Steel (Colorbond and Zincalume) is sold for scrap, clean timber is chipped, and asbestos is wrapped and taken only to facilities licensed to accept it.
