Asbestos in Old Australian Sheds: What Homeowners Need to Know
Australian sheds and garages built before 1990 often use asbestos cement sheeting, known as fibro. It is generally stable while intact but releases fibres when cut, drilled or broken. Each state limits how much homeowners may remove themselves, and larger amounts or friable material must be handled by a licensed removalist and taken to an approved facility.
Australia used asbestos cement more heavily than almost anywhere else in the world until it was phased out, and backyard sheds, carports and garages were among the most common places it ended up. If your shed has flat or corrugated grey sheeting and dates from before 1990, it is worth treating it with care before anyone picks up a hammer.
Last updated
How to tell if your shed may contain asbestos
You cannot confirm asbestos by looking at it; only laboratory testing of a sample is conclusive. But some signs make it more likely: the shed was built before the mid-1980s, walls or roof are flat or corrugated cement sheeting rather than steel, the sheets have a dimpled back, or the roof is the older 'Super Six' style corrugated profile.
Steel Colorbond and Zincalume sheds, timber sheds and most sheds built after 1990 are very unlikely to contain asbestos cement.
- Built before 1990, especially before the mid-1980s
- Grey cement sheeting rather than metal panels
- Corrugated cement roofing with wide, deep ribs
- Brittle edges or a fibrous look where the sheet is broken
Why you shouldn't knock it down yourself
Intact, sealed asbestos cement is low risk. The danger comes from breaking, cutting, sanding or water-blasting it, which releases fine fibres that can be inhaled. Demolishing a fibro shed with a sledgehammer is exactly the kind of work that creates that risk, for you and your neighbours.
Every state and territory sets limits on what a homeowner may remove without a licence and requires asbestos waste to be wrapped and taken to an approved facility. Rules differ between NSW, VIC, QLD, WA, SA, TAS, ACT and NT, so check your local council or state WorkSafe body before starting anything.
How professional removal works
- Assess the shed from photos or a visit and arrange testing if needed
- Isolate power and clear the contents
- Wet down sheets and remove them whole where possible, never broken up
- Double-wrap asbestos sheets in heavy plastic and label them
- Transport to a licensed disposal facility and keep the paperwork
- Dismantle the remaining frame and clean up the site
What to send with your quote request
Clear photos of the walls, roof and any broken edges, the approximate size, roughly when it was built if you know, and how close a vehicle can park. That is enough for us to tell you whether licensed asbestos handling is likely to be part of the job before we quote.
What else do people ask?
Is all fibro asbestos?
No. Fibre cement made in Australia after the late 1980s does not contain asbestos. Older sheeting often does, which is why age is the best first clue.
Can I leave an asbestos shed standing?
Intact, undamaged sheeting is generally considered low risk. Once it is cracking, weathered or damaged by storms, removal is usually the safer option.
Do I need to test before removal?
If the age and material suggest asbestos, testing or treating it as asbestos from the start is the safe approach. We confirm before quoting.
