Shed Removal in Redmond
Shed removal in Redmond costs from $150 to $1,200 USD for most garden sheds and usually takes 2–4 hours. The price covers dismantling, loading, licensed disposal and a final sweep. Concrete bases and asbestos sheeting are quoted as extras. Written quotes arrive by email within 24 hours, with at least five days' notice to book.
Old shed taking over the garden? Our Redmond team will handle the lot — demolition, loading, disposal and site clean-up — with a fixed written quote before we start. Covering every neighbourhood in WA.
Last updated
Get Your Free Quote
No obligation, fast response
How much does shed removal cost in Redmond?
These are guide prices for Redmond in USD. Your written quote fixes the final figure once we've seen photos of the structure and the access route.
| Job | Time on site | Guide price (USD) |
|---|---|---|
| Small shed (up to 8x6ft / 2.4x1.8m) | 1–2 hours | $150 – $400 |
| Medium garden shed (8x6ft to 10x8ft) | 2–4 hours | $300 – $650 |
| Large shed, workshop or summerhouse | 4–7 hours | $550 – $1,200 |
| Greenhouse (glass or polycarbonate) | 1–3 hours | $180 – $500 |
| Sectional concrete garage | 3–8 hours | $700 – $1,800 |
| Concrete base or slab breakout | +2–5 hours | +$250 – $900 |
| Asbestos cement / fibro sheeting (licensed handling) | +2–6 hours | +$450 – $1,500 |
What moves the price of a Redmond job
- Footprint and height of the structure
- Materials — timber, steel, glass, felt or concrete panels
- Whether the base or slab is coming out too
- Access: side gate, alley width and distance to the vehicle
- Volume of contents left inside
What does shed removal in Redmond include?
From small metal sheds in Redmond back gardens to large timber workshops on WA smallholdings, we've dismantled thousands of structures. Careful hand-demolition, tidy load-out and full disposal — no skip needed on your driveway.
What we remove in Redmond
- Aging garden sheds of any size
- Storm-damaged greenhouses
- Timber decking, sub-frame and joists
- Summerhouses, cabins and home offices
- Concrete bases, paving slabs and footings
Why Redmond homeowners choose us
Redmond homeowners choose us because we do the whole job — dismantle, remove, dispose and tidy up — for one fixed price. Fully insured, licensed waste carriers, and materials recycled wherever possible. Most quotes start around $150 to $1,200 USD.
Timber sheds and workshops
Rotten feather-edge, shiplap and log-lap sheds are stripped panel by panel, nails pulled and boards stacked for recycling — no bonfires in a Redmond garden.
Metal and steel sheds
Corrugated and box-profile sheeting is unbolted, folded flat and sent straight to scrap, which usually offsets part of the disposal cost.
Greenhouses
Glass is taped, lifted and crated before the frame comes down, so there are no shards left in the borders or lawn.
Decking and pergolas
Boards, joists, posts and concrete post-fixings all come out, leaving level ground ready for whatever comes next at your Redmond property.
What types of sheds are common in Redmond?
Wood sheds
Common in Redmond backyards; rot, termites and storm damage drive most removals.
Vinyl and resin sheds
Lightweight kits that break down fast.
Metal sheds
Steel or aluminum panels, recycled as scrap.
Detached garages and playhouses
Often removed together with the shed in one visit.
Do you need council permission to remove a shed in Redmond?
Many cities in WA require a demolition permit for accessory buildings above a size threshold, often around 120 to 200 square feet, while small sheds are exempt. Redmond's building department can confirm the limit and any HOA rules may also apply.
Asbestos rules in WA
Sheds and garages built before 1980 can contain asbestos in cement siding or roofing. Federal EPA rules and WA's environmental and labor agencies govern asbestos work, and the material must go to a landfill that accepts it.
Tips, transfer stations and recycling for Redmond waste
Debris from Redmond goes to licensed landfills, transfer stations and recycling centers. Metal is scrapped, clean lumber is separated, and asphalt shingles are disposed of under local rules.
How does a Redmond shed removal work?
011. Send photos or dimensions
Message us a couple of photos of the structure and rough measurements. Nothing to install, no site visit needed for most Redmond jobs.
022. Get a fixed written quote
We email a fixed price, usually within 24 hours, covering labour, disposal and clean-up. No hourly rates, no day-of surprises.
033. Pick a date
Choose a slot at least five days out. We confirm the arrival window the day before so you're not waiting around.
044. We dismantle and clear
Our insured crew strips the structure by hand, loads out, sweeps the ground and sends you finished photos before leaving your Redmond property.
Access and parking in Redmond
Older Redmond streets often mean narrow side passages, shared driveways and restricted parking. We plan the route before we arrive: barrow runs where a truck can't get close, floor protection where the only access is through the house, and permits or cones where WA parking is tight.
Getting ready for removal day
- Empty the shed of anything you want to keep
- Disconnect any electricity or water supply
- Unlock side gates and clear the access route
- Move cars off the driveway on the morning
- Let neighbours know if access is shared
Where does your old Redmond shed end up?
Everything we lift from a Redmond garden is sorted at our depot before it moves on. Clean timber goes to biomass or chipping, metal to scrap merchants, glass to glazing recyclers and plastics to a licensed reprocessor. Only genuinely mixed residue reaches landfill, which is why we typically divert over 85% of a WA shed by weight.
Which areas near Redmond do we cover?
Our Redmond crew also works across the surrounding towns and suburbs in WA. If your address is near any of the places below, the same pricing and booking process applies.
- Shed removal Yakima
- Shed removal Federal Way
- Shed removal Spokane Valley
- Shed removal Kirkland
- Shed removal Bellingham
- Shed removal Kennewick
- Shed removal Auburn
- Shed removal Pasco
- Shed removal Marysville
- Shed removal Lakewood
See every town we cover in WA or all shed removal locations in the United States.
Redmond shed removal: frequently asked questions
How quickly can you remove a shed in Redmond?
Most Redmond bookings are completed within 3–7 days of your quote being accepted. During quieter weeks we can often get to WA jobs sooner — mention "urgent" on your enquiry and we'll fit you in.
What happens to the waste from my Redmond shed?
Everything from your Redmond job is sorted by our licensed disposal partners. Timber, metal, glass and plastics are recycled wherever possible — we typically divert over 85% of shed materials from landfill.
Are you insured to work on Redmond properties?
Yes — we carry full public liability insurance, and our crew is trained in safe hand-demolition. Certificates are available on request before any Redmond booking.
Do you work weekends in Redmond?
We run limited Saturday slots across WA for customers who can't be home midweek. Weekend availability is tighter, so book earlier — and remember we need at least five days' notice on every Redmond booking.
Is there a minimum notice period?
Yes — we ask for a minimum of five days between your quote being accepted and the Redmond job date so we can route the crew and book disposal capacity. Urgent jobs are sometimes possible if a slot opens up; mark your enquiry "urgent" and we'll let you know.
What size sheds can you remove in Redmond?
Anything from a 6x4 tool shed to a double garage-sized workshop. Small timber and metal sheds are usually a half-day job; larger workshops, multi-bay structures and anything with a concrete base or asbestos-cement roof sheeting take longer and are priced accordingly after we see photos of the Redmond site.
What do I need to do before the crew arrives?
Empty the shed of anything you want to keep, unplug and disconnect any power or water feeds, and make sure there's a clear route from the shed to where we can park in Redmond. If you can't clear the contents, tell us and we'll price that in rather than turning up short of time.
Do I need permission to remove a shed in Redmond?
Many cities in WA require a demolition permit for accessory buildings above a size threshold, often around 120 to 200 square feet, while small sheds are exempt. Redmond's building department can confirm the limit and any HOA rules may also apply.
Which landfill, transfer station or recycling center does waste from Redmond go to?
Debris from Redmond goes to licensed landfills, transfer stations and recycling centers. Metal is scrapped, clean lumber is separated, and asphalt shingles are disposed of under local rules.
